dmesg - first run
Linux version 5.6.11-200.fc31.x86_64 (mockbuild@bkernel03.phx2.fedoraproject.org) (gcc version 9.3.1 20200408 (Red Hat 9.3.1-2) (GCC)) #1 SMP Wed May 6 19:10:55 UTC 2020
Command line: BOOT_IMAGE=(hd0,msdos1)/vmlinuz-5.6.11-200.fc31.x86_64 root=/dev/mapper/fedora_localhost--live-root ro resume=/dev/mapper/fedora_localhost--live-swap rd.lvm.lv=fedora_localhost-live/root rd.lvm.lv=fedora_localhost-live/swap rhgb quiet rd.driver.blacklist=nouveau modprobe.blacklist=nouveau nvidia-drm.modeset=1
random: get_random_u32 called from bsp_init_amd+0x1f8/0x2a0 with crng_init=0
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000ba78dfff] usable
BIOS-e820: [mem 0x00000000ba78e000-0x00000000baa69fff] reserved
BIOS-e820: [mem 0x00000000baa6a000-0x00000000baa79fff] ACPI data
BIOS-e820: [mem 0x00000000baa7a000-0x00000000bb87dfff] ACPI NVS
BIOS-e820: [mem 0x00000000bb87e000-0x00000000bca33fff] reserved
BIOS-e820: [mem 0x00000000bca34000-0x00000000bca34fff] usable
BIOS-e820: [mem 0x00000000bca35000-0x00000000bcc3afff] ACPI NVS
BIOS-e820: [mem 0x00000000bcc3b000-0x00000000bd082fff] usable
BIOS-e820: [mem 0x00000000bd083000-0x00000000bd7f3fff] reserved
BIOS-e820: [mem 0x00000000bd7f4000-0x00000000bd7fffff] usable
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100001000-0x000000043effffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: To be filled by O.E.M. To be filled by O.E.M./M5A97 R2.0, BIOS 2603 06/26/2015
tsc: Fast TSC calibration using PIT
tsc: Detected 3511.776 MHz processor
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x43f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-through
C0000-CEFFF write-protect
CF000-EBFFF uncachable
EC000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000BD800000 mask FFFFFF800000 uncachable
3 base 0000BE000000 mask FFFFFE000000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 000000043f000000 aka 17392M
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
e820: update [mem 0xbd800000-0xffffffff] usable ==> reserved
last_pfn = 0xbd800 max_arch_pfn = 0x400000000
Using GB pages for direct mapping
BRK [0x9d801000, 0x9d801fff] PGTABLE
BRK [0x9d802000, 0x9d802fff] PGTABLE
BRK [0x9d803000, 0x9d803fff] PGTABLE
BRK [0x9d804000, 0x9d804fff] PGTABLE
BRK [0x9d805000, 0x9d805fff] PGTABLE
BRK [0x9d806000, 0x9d806fff] PGTABLE
BRK [0x9d807000, 0x9d807fff] PGTABLE
BRK [0x9d808000, 0x9d808fff] PGTABLE
BRK [0x9d809000, 0x9d809fff] PGTABLE
BRK [0x9d80a000, 0x9d80afff] PGTABLE
BRK [0x9d80b000, 0x9d80bfff] PGTABLE
RAMDISK: [mem 0x342e0000-0x36167fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000BAA71070 00005C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x00000000BAA78200 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20200110/tbfadt-615)
ACPI: DSDT 0x00000000BAA71168 007095 (v02 ALASKA A M I 00000000 INTL 20051117)
ACPI: FACS 0x00000000BB878F80 000040
ACPI: APIC 0x00000000BAA78310 00009E (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x00000000BAA783B0 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x00000000BAA783F8 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
ACPI: HPET 0x00000000BAA78438 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
ACPI: SSDT 0x00000000BAA78500 001714 (v01 AMD POWERNOW 00000001 AMD 00000001)
ACPI: BGRT 0x00000000BAA784C8 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000043effffff]
NODE_DATA(0) allocated [mem 0x43efd3000-0x43effdfff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000043effffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009dfff]
node 0: [mem 0x0000000000100000-0x00000000ba78dfff]
node 0: [mem 0x00000000bca34000-0x00000000bca34fff]
node 0: [mem 0x00000000bcc3b000-0x00000000bd082fff]
node 0: [mem 0x00000000bd7f4000-0x00000000bd7fffff]
node 0: [mem 0x0000000100001000-0x000000043effffff]
Zeroed struct page in unavailable ranges: 25729 pages
Initmem setup node 0 [mem 0x0000000000001000-0x000000043effffff]
On node 0 totalpages: 4168575
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 11888 pages used for memmap
DMA32 zone: 760803 pages, LIFO batch:63
Normal zone: 53184 pages used for memmap
Normal zone: 3403775 pages, LIFO batch:63
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 10, version 33, address 0xfec20000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x43538210 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009efff]
PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: hibernation: Registered nosave memory: [mem 0xba78e000-0xbaa69fff]
PM: hibernation: Registered nosave memory: [mem 0xbaa6a000-0xbaa79fff]
PM: hibernation: Registered nosave memory: [mem 0xbaa7a000-0xbb87dfff]
PM: hibernation: Registered nosave memory: [mem 0xbb87e000-0xbca33fff]
PM: hibernation: Registered nosave memory: [mem 0xbca35000-0xbcc3afff]
PM: hibernation: Registered nosave memory: [mem 0xbd083000-0xbd7f3fff]
PM: hibernation: Registered nosave memory: [mem 0xbd800000-0xfebfffff]
PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
PM: hibernation: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
PM: hibernation: Registered nosave memory: [mem 0xfec11000-0xfec1ffff]
PM: hibernation: Registered nosave memory: [mem 0xfec20000-0xfec20fff]
PM: hibernation: Registered nosave memory: [mem 0xfec21000-0xfecfffff]
PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed60fff]
PM: hibernation: Registered nosave memory: [mem 0xfed61000-0xfed70fff]
PM: hibernation: Registered nosave memory: [mem 0xfed71000-0xfed7ffff]
PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
PM: hibernation: Registered nosave memory: [mem 0xfed90000-0xfeefffff]
PM: hibernation: Registered nosave memory: [mem 0xfef00000-0xffffffff]
PM: hibernation: Registered nosave memory: [mem 0x100000000-0x100000fff]
[mem 0xbd800000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
percpu: Embedded 55 pages/cpu s188416 r8192 d28672 u262144
pcpu-alloc: s188416 r8192 d28672 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists, mobility grouping on. Total pages: 4103418
Policy zone: Normal
Kernel command line: BOOT_IMAGE=(hd0,msdos1)/vmlinuz-5.6.11-200.fc31.x86_64 root=/dev/mapper/fedora_localhost--live-root ro resume=/dev/mapper/fedora_localhost--live-swap rd.lvm.lv=fedora_localhost-live/root rd.lvm.lv=fedora_localhost-live/swap rhgb quiet rd.driver.blacklist=nouveau modprobe.blacklist=nouveau nvidia-drm.modeset=1
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
mem auto-init: stack:off, heap alloc:off, heap free:off
Memory: 16247300K/16674300K available (14339K kernel code, 2400K rwdata, 5008K rodata, 2468K init, 6124K bss, 427000K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
ftrace: allocating 41802 entries in 164 pages
ftrace: allocated 164 pages with 3 groups
rcu: Hierarchical RCU implementation.
rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
NR_IRQS: 524544, nr_irqs: 1032, preallocated irqs: 16
Console: colour VGA+ 80x25
printk: console [tty0] enabled
ACPI: Core revision 20200110
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
APIC: Switch to symmetric I/O mode setup
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x329ec5c68fc, max_idle_ns: 440795344089 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 7023.55 BogoMIPS (lpj=3511776)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
Yama: becoming mindful.
SELinux: Initializing.
*** VALIDATE selinux ***
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
*** VALIDATE tmpfs ***
*** VALIDATE proc ***
*** VALIDATE cgroup ***
*** VALIDATE cgroup2 ***
LVT offset 1 assigned for vector 0xf9
Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Full AMD retpoline
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Spectre V2 : User space: Vulnerable
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
Freeing SMP alternatives memory: 36K
smpboot: CPU0: AMD FX(tm)-8320 Eight-Core Processor (family: 0x15, model: 0x2, stepping: 0x0)
Performance Events: Fam15h core perfctr, AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
rcu: Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
smp: Brought up 1 node, 8 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 8 processors activated (56188.41 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0xbaa7a000-0xbb87dfff] (14696448 bytes)
PM: Registering ACPI NVS region [mem 0xbca35000-0xbcc3afff] (2121728 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
pinctrl core: initialized pinctrl subsystem
PM: RTC time: 23:07:26, date: 2020-05-15
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1589584046.169:1): state=initialized audit_enabled=0 res=1
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
cryptd: max_cpu_qlen set to 1000
alg: No test for 842 (842-generic)
alg: No test for 842 (842-scomp)
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: 2 ACPI AML tables successfully acquired and loaded
ACPI: EC: EC started
ACPI: EC: interrupt blocked
ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.SBRG.EC0_: Boot DSDT EC used to handle transactions
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 11 GPEs in block 00 to 1F
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000
pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400
pci 0000:00:02.0: enabling Extended Tags
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: [1002:5a18] type 01 class 0x060400
pci 0000:00:04.0: enabling Extended Tags
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: [1002:5a19] type 01 class 0x060400
pci 0000:00:05.0: enabling Extended Tags
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: [1002:5a1b] type 01 class 0x060400
pci 0000:00:07.0: enabling Extended Tags
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
pci 0000:00:11.0: reg 0x10: [io 0xf040-0xf047]
pci 0000:00:11.0: reg 0x14: [io 0xf030-0xf033]
pci 0000:00:11.0: reg 0x18: [io 0xf020-0xf027]
pci 0000:00:11.0: reg 0x1c: [io 0xf010-0xf013]
pci 0000:00:11.0: reg 0x20: [io 0xf000-0xf00f]
pci 0000:00:11.0: reg 0x24: [mem 0xfe40b000-0xfe40b3ff]
pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:12.0: reg 0x10: [mem 0xfe40a000-0xfe40afff]
pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:12.2: reg 0x10: [mem 0xfe409000-0xfe4090ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:13.0: reg 0x10: [mem 0xfe408000-0xfe408fff]
pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:13.2: reg 0x10: [mem 0xfe407000-0xfe4070ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
pci 0000:00:14.2: reg 0x10: [mem 0xfe400000-0xfe403fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
pci 0000:00:14.5: reg 0x10: [mem 0xfe406000-0xfe406fff]
pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
pci 0000:00:15.0: enabling Extended Tags
pci 0000:00:15.0: supports D1 D2
pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:16.0: reg 0x10: [mem 0xfe405000-0xfe405fff]
pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:16.2: reg 0x10: [mem 0xfe404000-0xfe4040ff]
pci 0000:00:16.2: supports D1 D2
pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:18.0: [1022:1600] type 00 class 0x060000
pci 0000:00:18.1: [1022:1601] type 00 class 0x060000
pci 0000:00:18.2: [1022:1602] type 00 class 0x060000
pci 0000:00:18.3: [1022:1603] type 00 class 0x060000
pci 0000:00:18.4: [1022:1604] type 00 class 0x060000
pci 0000:00:18.5: [1022:1605] type 00 class 0x060000
pci 0000:01:00.0: [10de:1b81] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
pci 0000:01:00.0: reg 0x30: [mem 0xfe000000-0xfe07ffff pref]
pci 0000:01:00.0: enabling Extended Tags
pci 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x16 link at 0000:00:02.0 (capable of 126.016 Gb/s with 8 GT/s x16 link)
pci 0000:01:00.1: [10de:10f0] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xfe080000-0xfe083fff]
pci 0000:01:00.1: enabling Extended Tags
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfd000000-0xfe0fffff]
pci 0000:00:02.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [io 0xd000-0xd0ff]
pci 0000:02:00.0: reg 0x18: [mem 0xd2104000-0xd2104fff 64bit pref]
pci 0000:02:00.0: reg 0x20: [mem 0xd2100000-0xd2103fff 64bit pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.0: PCI bridge to [bus 02]
pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:04.0: bridge window [mem 0xd2100000-0xd21fffff 64bit pref]
pci 0000:03:00.0: [1b21:1142] type 00 class 0x0c0330
pci 0000:03:00.0: reg 0x10: [mem 0xfe300000-0xfe307fff 64bit]
pci 0000:03:00.0: PME# supported from D3cold
pci 0000:00:05.0: PCI bridge to [bus 03]
pci 0000:00:05.0: bridge window [mem 0xfe300000-0xfe3fffff]
pci 0000:04:00.0: [1b21:1142] type 00 class 0x0c0330
pci 0000:04:00.0: reg 0x10: [mem 0xfe200000-0xfe207fff 64bit]
pci 0000:04:00.0: PME# supported from D3cold
pci 0000:00:07.0: PCI bridge to [bus 04]
pci 0000:00:07.0: bridge window [mem 0xfe200000-0xfe2fffff]
pci_bus 0000:05: extended config space not accessible
pci 0000:05:05.0: [1412:1712] type 00 class 0x040100
pci 0000:05:05.0: reg 0x10: [io 0xc040-0xc05f]
pci 0000:05:05.0: reg 0x14: [io 0xc070-0xc07f]
pci 0000:05:05.0: reg 0x18: [io 0xc060-0xc06f]
pci 0000:05:05.0: reg 0x1c: [io 0xc000-0xc03f]
pci 0000:05:05.0: supports D2
pci 0000:00:14.4: PCI bridge to [bus 05] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
pci 0000:00:14.4: bridge window [io 0x0000-0x03af window] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03b0-0x03df window] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff window] (subtractive decode)
pci 0000:06:00.0: [8086:2526] type 00 class 0x028000
pci 0000:06:00.0: reg 0x10: [mem 0xfe100000-0xfe103fff 64bit]
pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:15.0: PCI bridge to [bus 06]
pci 0000:00:15.0: bridge window [mem 0xfe100000-0xfe1fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0
ACPI: EC: interrupt unblocked
ACPI: EC: event unblocked
ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: EC: GPE=0xa
ACPI: \_SB_.PCI0.SBRG.EC0_: Boot DSDT EC used to handle transactions and events
iommu: Default domain type: Translated
pci 0000:01:00.0: vgaarb: setting as boot VGA device
pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:01:00.0: vgaarb: bridge control possible
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
e820: reserve RAM buffer [mem 0xba78e000-0xbbffffff]
e820: reserve RAM buffer [mem 0xbca35000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbd083000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbd800000-0xbfffffff]
e820: reserve RAM buffer [mem 0x43f000000-0x43fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource tsc-early
*** VALIDATE bpf ***
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
*** VALIDATE ramfs ***
*** VALIDATE hugetlbfs ***
pnp: PnP ACPI init
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x040b] has been reserved
system 00:01: [io 0x04d6] has been reserved
system 00:01: [io 0x0c00-0x0c01] has been reserved
system 00:01: [io 0x0c14] has been reserved
system 00:01: [io 0x0c50-0x0c51] has been reserved
system 00:01: [io 0x0c52] has been reserved
system 00:01: [io 0x0c6c] has been reserved
system 00:01: [io 0x0c6f] has been reserved
system 00:01: [io 0x0cd0-0x0cd1] has been reserved
system 00:01: [io 0x0cd2-0x0cd3] has been reserved
system 00:01: [io 0x0cd4-0x0cd5] has been reserved
system 00:01: [io 0x0cd6-0x0cd7] has been reserved
system 00:01: [io 0x0cd8-0x0cdf] has been reserved
system 00:01: [io 0x0800-0x089f] has been reserved
system 00:01: [io 0x0b20-0x0b3f] has been reserved
system 00:01: [io 0x0900-0x090f] has been reserved
system 00:01: [io 0x0910-0x091f] has been reserved
system 00:01: [io 0xfe00-0xfefe] has been reserved
system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:01: [mem 0xfed00000-0xfed00fff] could not be reserved
system 00:01: [mem 0xff800000-0xffffffff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [io 0x0290-0x02af] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:04: [io 0x04d0-0x04d1] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: [dma 0 disabled]
pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [mem 0xfec20000-0xfec200ff] could not be reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 9 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfd000000-0xfe0fffff]
pci 0000:00:02.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
pci 0000:00:04.0: PCI bridge to [bus 02]
pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:04.0: bridge window [mem 0xd2100000-0xd21fffff 64bit pref]
pci 0000:00:05.0: PCI bridge to [bus 03]
pci 0000:00:05.0: bridge window [mem 0xfe300000-0xfe3fffff]
pci 0000:00:07.0: PCI bridge to [bus 04]
pci 0000:00:07.0: bridge window [mem 0xfe200000-0xfe2fffff]
pci 0000:00:14.4: PCI bridge to [bus 05]
pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
pci 0000:00:15.0: PCI bridge to [bus 06]
pci 0000:00:15.0: bridge window [mem 0xfe100000-0xfe1fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff window]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfd000000-0xfe0fffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:02: resource 2 [mem 0xd2100000-0xd21fffff 64bit pref]
pci_bus 0000:03: resource 1 [mem 0xfe300000-0xfe3fffff]
pci_bus 0000:04: resource 1 [mem 0xfe200000-0xfe2fffff]
pci_bus 0000:05: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:05: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:05: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:05: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:05: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:05: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:05: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:05: resource 10 [mem 0xc0000000-0xffffffff window]
pci_bus 0000:06: resource 1 [mem 0xfe100000-0xfe1fffff]
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
NET: Registered protocol family 1
NET: Registered protocol family 44
pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x615 took 14548 usecs
pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x615 took 11607 usecs
pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x615 took 11602 usecs
pci 0000:00:16.0: quirk_usb_early_handoff+0x0/0x615 took 11709 usecs
pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 31264K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0xb678e000-0xba78e000] (64MB)
amd_uncore: AMD NB counters detected
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000000ff)
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=22 bucket_order=0
zbud: loaded
Platform Keyring initialized
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
io scheduler mq-deadline registered
io scheduler kyber registered
io scheduler bfq registered
atomic64_test: passed for x86-64 platform with CX8 and with SSE
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: \_PR_.P001: Found 2 idle states
ACPI: \_PR_.P002: Found 2 idle states
ACPI: \_PR_.P003: Found 2 idle states
ACPI: \_PR_.P004: Found 2 idle states
ACPI: \_PR_.P005: Found 2 idle states
ACPI: \_PR_.P006: Found 2 idle states
ACPI: \_PR_.P007: Found 2 idle states
ACPI: \_PR_.P008: Found 2 idle states
00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0200 32 slots 3 ports 6 Gbps 0x1a impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
ata1: DUMMY
ata2: SATA max UDMA/133 abar m1024@0xfe40b000 port 0xfe40b180 irq 19
ata3: DUMMY
ata4: SATA max UDMA/133 abar m1024@0xfe40b000 port 0xfe40b280 irq 19
ata5: SATA max UDMA/133 abar m1024@0xfe40b000 port 0xfe40b300 irq 19
libphy: Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
QUIRK: Enable AMD PLL fix
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xfe409000
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.06
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 5.6.11-200.fc31.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 21, io mem 0xfe407000
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.06
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 5.6.11-200.fc31.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
ehci-pci 0000:00:16.2: EHCI Host Controller
ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:16.2: debug port 1
ehci-pci 0000:00:16.2: irq 23, io mem 0xfe404000
ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.06
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 5.6.11-200.fc31.x86_64 ehci_hcd
usb usb3: SerialNumber: 0000:00:16.2
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:12.0: OHCI PCI host controller
ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4
ohci-pci 0000:00:12.0: irq 18, io mem 0xfe40a000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.06
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI PCI host controller
usb usb4: Manufacturer: Linux 5.6.11-200.fc31.x86_64 ohci_hcd
usb usb4: SerialNumber: 0000:00:12.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci-pci 0000:00:13.0: irq 20, io mem 0xfe408000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.06
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI PCI host controller
usb usb5: Manufacturer: Linux 5.6.11-200.fc31.x86_64 ohci_hcd
usb usb5: SerialNumber: 0000:00:13.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 5 ports detected
ohci-pci 0000:00:14.5: OHCI PCI host controller
ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 6
ohci-pci 0000:00:14.5: irq 18, io mem 0xfe406000
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.06
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI PCI host controller
usb usb6: Manufacturer: Linux 5.6.11-200.fc31.x86_64 ohci_hcd
usb usb6: SerialNumber: 0000:00:14.5
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ohci-pci 0000:00:16.0: OHCI PCI host controller
ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 7
ohci-pci 0000:00:16.0: irq 22, io mem 0xfe405000
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.06
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI PCI host controller
usb usb7: Manufacturer: Linux 5.6.11-200.fc31.x86_64 ohci_hcd
usb usb7: SerialNumber: 0000:00:16.0
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 4 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 8
xhci_hcd 0000:03:00.0: hcc params 0x0200e081 hci version 0x100 quirks 0x0000000010000410
usb usb8: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.06
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: xHCI Host Controller
usb usb8: Manufacturer: Linux 5.6.11-200.fc31.x86_64 xhci-hcd
usb usb8: SerialNumber: 0000:03:00.0
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 9
xhci_hcd 0000:03:00.0: Host supports USB 3.0 SuperSpeed
usb usb9: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb9: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.06
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: xHCI Host Controller
usb usb9: Manufacturer: Linux 5.6.11-200.fc31.x86_64 xhci-hcd
usb usb9: SerialNumber: 0000:03:00.0
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 2 ports detected
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 10
xhci_hcd 0000:04:00.0: hcc params 0x0200e081 hci version 0x100 quirks 0x0000000010000410
usb usb10: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.06
usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb10: Product: xHCI Host Controller
usb usb10: Manufacturer: Linux 5.6.11-200.fc31.x86_64 xhci-hcd
usb usb10: SerialNumber: 0000:04:00.0
hub 10-0:1.0: USB hub found
hub 10-0:1.0: 2 ports detected
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 11
xhci_hcd 0000:04:00.0: Host supports USB 3.0 SuperSpeed
usb usb11: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb11: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.06
usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb11: Product: xHCI Host Controller
usb usb11: Manufacturer: Linux 5.6.11-200.fc31.x86_64 xhci-hcd
usb usb11: SerialNumber: 0000:04:00.0
hub 11-0:1.0: USB hub found
hub 11-0:1.0: 2 ports detected
usbcore: registered new interface driver usbserial_generic
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: registered as rtc0
rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.42.0-ioctl (2020-02-27) initialised: dm-devel@redhat.com
hid: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
x86/pm: family 0x15 cpu detected, MSR saving is needed during suspending.
drop_monitor: Initializing network drop monitor service
Initializing XFRM netlink socket
NET: Registered protocol family 10
Segment Routing with IPv6
mip6: Mobile IPv6
NET: Registered protocol family 17
RAS: Correctable Errors collector initialized.
microcode: microcode updated early to new patch_level=0x06000852
microcode: CPU0: patch_level=0x06000852
microcode: CPU1: patch_level=0x06000852
microcode: CPU2: patch_level=0x06000852
microcode: CPU3: patch_level=0x06000852
microcode: CPU4: patch_level=0x06000852
microcode: CPU5: patch_level=0x06000852
microcode: CPU6: patch_level=0x06000852
microcode: CPU7: patch_level=0x06000852
microcode: Microcode Update Driver: v2.2.
IPI shorthand broadcast: enabled
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: ATA-8: WDC WD5002AALX-00J37A0, 15.01H15, max UDMA/133
ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32), AA
ata5.00: ATA-11: SanDisk SDSSDH31024G, X6107000, max UDMA/133
ata5.00: 2000409264 sectors, multi 1: LBA48 NCQ (depth 32), AA
ata4.00: ATAPI: HL-DT-ST BD-RE WH16NS40, 1.04, max UDMA/133
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA WDC WD5002AALX-0 1H15 PQ: 0 ANSI: 5
scsi 1:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata4.00: configured for UDMA/133
ata5.00: configured for UDMA/133
scsi 3:0:0:0: CD-ROM HL-DT-ST BD-RE WH16NS40 1.04 PQ: 0 ANSI: 5
sched_clock: Marking stable (1635448297, 3999220)->(1940897850, -301450333)
registered taskstats version 1
Loading compiled-in X.509 certificates
sr 3:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
sr 3:0:0:0: Attached scsi generic sg1 type 5
scsi 4:0:0:0: Direct-Access ATA SanDisk SDSSDH31 7000 PQ: 0 ANSI: 5
sd 4:0:0:0: Attached scsi generic sg2 type 0
sd 4:0:0:0: [sdb] 2000409264 512-byte logical blocks: (1.02 TB/954 GiB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2
sd 4:0:0:0: [sdb] Attached SCSI disk
sda: sda1 sda2 sda3 sda4
sd 1:0:0:0: [sda] Attached SCSI disk
Loaded X.509 cert 'Fedora kernel signing key: e488751c57c72ac6b71a7ba57fa646479c1d7e2e'
zswap: loaded using pool lzo/zbud
Key type ._fscrypt registered
Key type .fscrypt registered
Key type fscrypt-provisioning registered
Key type big_key registered
Key type encrypted registered
ima: No TPM chip found, activating TPM-bypass!
ima: Allocated hash algorithm: sha256
ima: No architecture policies found
PM: Magic number: 4:626:150
pci 0000:00:14.3: hash matches
rtc_cmos 00:03: setting system clock to 2020-05-15T23:07:27 UTC (1589584047)
Freeing unused decrypted memory: 2040K
Freeing unused kernel image (initmem) memory: 2468K
Write protecting the kernel read-only data: 22528k
Freeing unused kernel image (text/rodata gap) memory: 2044K
Freeing unused kernel image (rodata/data gap) memory: 1136K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
rodata_test: all tests were successful
Run /init as init process
with arguments:
/init
rhgb
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=(hd0,msdos1)/vmlinuz-5.6.11-200.fc31.x86_64
systemd[1]: systemd v243.8-1.fc31 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
systemd[1]: Detected architecture x86-64.
systemd[1]: Running in initial RAM disk.
systemd[1]: Set hostname to .
usb 4-1: new full-speed USB device number 2 using ohci-pci
usb 5-1: new full-speed USB device number 2 using ohci-pci
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Created slice system-systemd\x2dhibernate\x2dresume.slice.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Reached target Slices.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Reached target Swap.
systemd[1]: Reached target Timers.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
fuse: init (API version 7.31)
*** VALIDATE fuseblk ***
*** VALIDATE fuse ***
usb 8-1: new high-speed USB device number 2 using xhci_hcd
usb 4-1: New USB device found, idVendor=17f6, idProduct=0864, bcdDevice= 7.37
usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-1: Product: Unicomp R7_2_Apple_10x_Kbrd_v7_37
usb 4-1: Manufacturer: Unicomp Inc
usb 5-1: New USB device found, idVendor=28de, idProduct=1142, bcdDevice= 0.01
usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1: Product: Steam Controller
usb 5-1: Manufacturer: Valve Software
input: Unicomp Inc Unicomp R7_2_Apple_10x_Kbrd_v7_37 as /devices/pci0000:00/0000:00:12.0/usb4/4-1/4-1:1.0/0003:17F6:0864.0001/input/input2
input: Valve Software Steam Controller Keyboard as /devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.0/0003:28DE:1142.0002/input/input3
usb 10-2: new high-speed USB device number 2 using xhci_hcd
hid-generic 0003:17F6:0864.0001: input,hidraw0: USB HID v1.11 Keyboard [Unicomp Inc Unicomp R7_2_Apple_10x_Kbrd_v7_37] on usb-0000:00:12.0-1/input0
input: Unicomp Inc Unicomp R7_2_Apple_10x_Kbrd_v7_37 System Control as /devices/pci0000:00/0000:00:12.0/usb4/4-1/4-1:1.1/0003:17F6:0864.0003/input/input5
input: Valve Software Steam Controller Mouse as /devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.0/0003:28DE:1142.0002/input/input4
usb 8-1: New USB device found, idVendor=046d, idProduct=085e, bcdDevice= 0.17
usb 8-1: New USB device strings: Mfr=0, Product=2, SerialNumber=3
usb 8-1: Product: Logitech BRIO
usb 8-1: SerialNumber: 16307179
input: Unicomp Inc Unicomp R7_2_Apple_10x_Kbrd_v7_37 Consumer Control as /devices/pci0000:00/0000:00:12.0/usb4/4-1/4-1:1.1/0003:17F6:0864.0003/input/input6
hid-generic 0003:28DE:1142.0002: input,hidraw1: USB HID v1.11 Keyboard [Valve Software Steam Controller] on usb-0000:00:13.0-1/input0
hid-generic 0003:17F6:0864.0003: input,hidraw2: USB HID v1.11 Device [Unicomp Inc Unicomp R7_2_Apple_10x_Kbrd_v7_37] on usb-0000:00:12.0-1/input1
hid-generic 0003:28DE:1142.0004: hiddev96,hidraw3: USB HID v1.11 Device [Valve Software Steam Controller] on usb-0000:00:13.0-1/input1
hid-generic 0003:28DE:1142.0005: hiddev97,hidraw4: USB HID v1.11 Device [Valve Software Steam Controller] on usb-0000:00:13.0-1/input2
hid-generic 0003:28DE:1142.0006: hiddev98,hidraw5: USB HID v1.11 Device [Valve Software Steam Controller] on usb-0000:00:13.0-1/input3
hid-generic 0003:28DE:1142.0007: hiddev99,hidraw6: USB HID v1.11 Device [Valve Software Steam Controller] on usb-0000:00:13.0-1/input4
tsc: Refined TSC clocksource calibration: 3511.677 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x329e67f0b14, max_idle_ns: 440795316066 ns
clocksource: Switched to clocksource tsc
usb 10-2: New USB device found, idVendor=0bda, idProduct=5411, bcdDevice= 1.18
usb 10-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 10-2: Product: 4-Port USB 2.0 Hub
usb 10-2: Manufacturer: Generic
hub 10-2:1.0: USB hub found
hub 10-2:1.0: 4 ports detected
usb 11-2: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
usb 11-2: New USB device found, idVendor=0bda, idProduct=0411, bcdDevice= 1.18
usb 11-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 11-2: Product: 4-Port USB 3.0 Hub
usb 11-2: Manufacturer: Generic
hub 11-2:1.0: USB hub found
hub 11-2:1.0: 4 ports detected
audit: type=1130 audit(1589584048.204:2): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
usb 10-2.4: new high-speed USB device number 3 using xhci_hcd
usb 10-2.4: New USB device found, idVendor=0bda, idProduct=5411, bcdDevice= 1.18
usb 10-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 10-2.4: Product: 4-Port USB 2.0 Hub
usb 10-2.4: Manufacturer: Generic
hub 10-2.4:1.0: USB hub found
hub 10-2.4:1.0: 4 ports detected
usb 4-4: new full-speed USB device number 3 using ohci-pci
audit: type=1130 audit(1589584048.403:3): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
usb 11-2.4: new SuperSpeed Gen 1 USB device number 3 using xhci_hcd
usb 11-2.4: New USB device found, idVendor=0bda, idProduct=0411, bcdDevice= 1.18
usb 11-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 11-2.4: Product: 4-Port USB 3.0 Hub
usb 11-2.4: Manufacturer: Generic
input: Valve Software Steam Controller as /devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.0/0003:28DE:1142.0002/input/input7
hub 11-2.4:1.0: USB hub found
hub 11-2.4:1.0: 4 ports detected
random: fast init done
audit: type=1130 audit(1589584048.502:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1589584048.518:5): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=plymouth-start comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
hid-steam 0003:28DE:1142.0002: input,hidraw1: USB HID v1.11 Keyboard [Valve Software Steam Controller] on usb-0000:00:13.0-1/input0
hid-steam 0003:28DE:1142.0004: hiddev96: USB HID v1.11 Device [Valve Software Steam Controller] on usb-0000:00:13.0-1/input1
hid-steam 0003:28DE:1142.0008: hidraw3: USB HID v1.11 Device [Valve Software Steam Controller] on usb-0000:00:13.0-1/input1
r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
libphy: r8169: probed
r8169 0000:02:00.0 eth0: RTL8168f/8111f, 2c:4d:54:d7:b9:27, XID 480, IRQ 50
r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
usb 4-4: New USB device found, idVendor=046d, idProduct=c332, bcdDevice= 3.02
usb 4-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 4-4: Product: Gaming Mouse G502
usb 4-4: Manufacturer: Logitech
usb 4-4: SerialNumber: 0B6C37513831
hid-steam 0003:28DE:1142.0004: Steam wireless receiver connected
input: Logitech Gaming Mouse G502 as /devices/pci0000:00/0000:00:12.0/usb4/4-4/4-4:1.0/0003:046D:C332.0009/input/input8
hid-generic 0003:046D:C332.0009: input,hidraw7: USB HID v1.11 Mouse [Logitech Gaming Mouse G502] on usb-0000:00:12.0-4/input0
hid-steam 0003:28DE:1142.0005: hiddev97: USB HID v1.11 Device [Valve Software Steam Controller] on usb-0000:00:13.0-1/input2
hid-steam 0003:28DE:1142.000A: hidraw4: USB HID v1.11 Device [Valve Software Steam Controller] on usb-0000:00:13.0-1/input2
input: Logitech Gaming Mouse G502 Keyboard as /devices/pci0000:00/0000:00:12.0/usb4/4-4/4-4:1.1/0003:046D:C332.000B/input/input9
hid-steam 0003:28DE:1142.0005: Steam wireless receiver connected
hid-steam 0003:28DE:1142.0006: hiddev98: USB HID v1.11 Device [Valve Software Steam Controller] on usb-0000:00:13.0-1/input3
hid-steam 0003:28DE:1142.000C: hidraw5: USB HID v1.11 Device [Valve Software Steam Controller] on usb-0000:00:13.0-1/input3
r8169 0000:02:00.0 enp2s0: renamed from eth0
input: Logitech Gaming Mouse G502 Consumer Control as /devices/pci0000:00/0000:00:12.0/usb4/4-4/4-4:1.1/0003:046D:C332.000B/input/input10
input: Logitech Gaming Mouse G502 System Control as /devices/pci0000:00/0000:00:12.0/usb4/4-4/4-4:1.1/0003:046D:C332.000B/input/input11
hid-generic 0003:046D:C332.000B: input,hiddev100,hidraw8: USB HID v1.11 Keyboard [Logitech Gaming Mouse G502] on usb-0000:00:12.0-4/input1
hid-steam 0003:28DE:1142.0006: Steam wireless receiver connected
hid-steam 0003:28DE:1142.0007: hiddev99: USB HID v1.11 Device [Valve Software Steam Controller] on usb-0000:00:13.0-1/input4
hid-steam 0003:28DE:1142.000D: hidraw6: USB HID v1.11 Device [Valve Software Steam Controller] on usb-0000:00:13.0-1/input4
hid-steam 0003:28DE:1142.0007: Steam wireless receiver connected
random: crng init done
random: 7 urandom warning(s) missed due to ratelimiting
usb 1-5: new high-speed USB device number 4 using ehci-pci
usb 1-5: New USB device found, idVendor=1235, idProduct=8201, bcdDevice= 6.2f
usb 1-5: New USB device strings: Mfr=1, Product=3, SerialNumber=2
usb 1-5: Product: Scarlett 18i20 USB
usb 1-5: Manufacturer: Focusrite
usb 1-5: SerialNumber: 02008649
PM: Image not found (code -22)
audit: type=1130 audit(1589584049.680:6): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-hibernate-resume@dev-mapper-fedora_localhost\x2d\x2dlive\x2dswap comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1589584049.680:7): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-hibernate-resume@dev-mapper-fedora_localhost\x2d\x2dlive\x2dswap comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1589584049.689:8): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1589584049.710:9): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-initqueue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1589584049.731:10): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-fsck-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
systemd-journald[327]: Received SIGTERM from PID 1 (systemd).
printk: systemd: 24 output lines suppressed due to ratelimiting
SELinux: Permission watch in class filesystem not defined in policy.
SELinux: Permission watch in class file not defined in policy.
SELinux: Permission watch_mount in class file not defined in policy.
SELinux: Permission watch_sb in class file not defined in policy.
SELinux: Permission watch_with_perm in class file not defined in policy.
SELinux: Permission watch_reads in class file not defined in policy.
SELinux: Permission watch in class dir not defined in policy.
SELinux: Permission watch_mount in class dir not defined in policy.
SELinux: Permission watch_sb in class dir not defined in policy.
SELinux: Permission watch_with_perm in class dir not defined in policy.
SELinux: Permission watch_reads in class dir not defined in policy.
SELinux: Permission watch in class lnk_file not defined in policy.
SELinux: Permission watch_mount in class lnk_file not defined in policy.
SELinux: Permission watch_sb in class lnk_file not defined in policy.
SELinux: Permission watch_with_perm in class lnk_file not defined in policy.
SELinux: Permission watch_reads in class lnk_file not defined in policy.
SELinux: Permission watch in class chr_file not defined in policy.
SELinux: Permission watch_mount in class chr_file not defined in policy.
SELinux: Permission watch_sb in class chr_file not defined in policy.
SELinux: Permission watch_with_perm in class chr_file not defined in policy.
SELinux: Permission watch_reads in class chr_file not defined in policy.
SELinux: Permission watch in class blk_file not defined in policy.
SELinux: Permission watch_mount in class blk_file not defined in policy.
SELinux: Permission watch_sb in class blk_file not defined in policy.
SELinux: Permission watch_with_perm in class blk_file not defined in policy.
SELinux: Permission watch_reads in class blk_file not defined in policy.
SELinux: Permission watch in class sock_file not defined in policy.
SELinux: Permission watch_mount in class sock_file not defined in policy.
SELinux: Permission watch_sb in class sock_file not defined in policy.
SELinux: Permission watch_with_perm in class sock_file not defined in policy.
SELinux: Permission watch_reads in class sock_file not defined in policy.
SELinux: Permission watch in class fifo_file not defined in policy.
SELinux: Permission watch_mount in class fifo_file not defined in policy.
SELinux: Permission watch_sb in class fifo_file not defined in policy.
SELinux: Permission watch_with_perm in class fifo_file not defined in policy.
SELinux: Permission watch_reads in class fifo_file not defined in policy.
SELinux: Class perf_event not defined in policy.
SELinux: Class lockdown not defined in policy.
SELinux: the above unknown classes and permissions will be allowed
SELinux: policy capability network_peer_controls=1
SELinux: policy capability open_perms=1
SELinux: policy capability extended_socket_class=1
SELinux: policy capability always_check_network=0
SELinux: policy capability cgroup_seclabel=1
SELinux: policy capability nnp_nosuid_transition=1
systemd[1]: Successfully loaded SELinux policy in 392.971ms.
systemd[1]: RTC configured in localtime, applying delta of -240 minutes to system time.
systemd[1]: Relabelled /dev, /dev/shm, /run, /sys/fs/cgroup in 38.479ms.
systemd[1]: systemd v243.8-1.fc31 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: /usr/lib/systemd/system/sssd.service:12: PIDFile= references a path below legacy directory /var/run/, updating /var/run/sssd.pid → /run/sssd.pid; please update the unit file accordingly.
systemd[1]: /usr/lib/systemd/system/iscsid.service:11: PIDFile= references a path below legacy directory /var/run/, updating /var/run/iscsid.pid → /run/iscsid.pid; please update the unit file accordingly.
systemd[1]: /usr/lib/systemd/system/iscsiuio.service:13: PIDFile= references a path below legacy directory /var/run/, updating /var/run/iscsiuio.pid → /run/iscsiuio.pid; please update the unit file accordingly.
systemd[1]: /usr/lib/systemd/system/libvirtd-admin.socket:8: ListenStream= references a path below legacy directory /var/run/, updating /var/run/libvirt/libvirt-admin-sock → /run/libvirt/libvirt-admin-sock; please update the unit file accordingly.
systemd[1]: /usr/lib/systemd/system/libvirtd-ro.socket:8: ListenStream= references a path below legacy directory /var/run/, updating /var/run/libvirt/libvirt-sock-ro → /run/libvirt/libvirt-sock-ro; please update the unit file accordingly.
systemd[1]: /usr/lib/systemd/system/libvirtd.socket:6: ListenStream= references a path below legacy directory /var/run/, updating /var/run/libvirt/libvirt-sock → /run/libvirt/libvirt-sock; please update the unit file accordingly.
systemd[1]: /usr/lib/systemd/system/virtlockd.socket:6: ListenStream= references a path below legacy directory /var/run/, updating /var/run/libvirt/virtlockd-sock → /run/libvirt/virtlockd-sock; please update the unit file accordingly.
Adding 8228860k swap on /dev/mapper/fedora_localhost--live-swap. Priority:-2 extents:1 across:8228860k SSFS
EXT4-fs (dm-0): re-mounted. Opts: (null)
vboxdrv: loading out-of-tree module taints kernel.
vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
vboxdrv: Found 8 processor cores
vboxdrv: TSC mode is Invariant, tentative frequency 3511689648 Hz
vboxdrv: Successfully loaded version 6.1.6_RPMFusion (interface 0x002d0001)
VBoxNetFlt: Successfully started.
VBoxNetAdp: Successfully started.
kauditd_printk_skb: 69 callbacks suppressed
audit: type=1130 audit(1589598451.235:80): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1589598451.235:81): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1305 audit(1589598451.578:82): op=set audit_enabled=1 old=1 auid=4294967295 ses=4294967295 subj=system_u:system_r:syslogd_t:s0 res=1
audit: type=1130 audit(1589598451.582:83): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
systemd-journald[672]: Received client request to flush runtime journal.
audit: type=1130 audit(1589598451.709:84): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-journal-flush comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1589598451.776:85): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
acpi_cpufreq: overriding BIOS provided _PSD data
IPMI message handler: version 39.2
ipmi device interface
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: Using register 0x2c for SMBus port selection
piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
sp5100-tco sp5100-tco: Using 0xfed80b00 for watchdog MMIO address
sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0)
input: PC Speaker as /devices/platform/pcspkr/input/input14
cfg80211: Loading compiled-in X.509 certificates for regulatory database
asus_wmi: ASUS WMI generic driver loaded
cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
mc: Linux media interface: v0.10
asus_wmi: Initialization: 0x0
asus_wmi: BIOS WMI version: 0.9
asus_wmi: SFUN value: 0x0
eeepc-wmi eeepc-wmi: Detected ASUSWMI, use DCTS
input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input15
videodev: Linux video capture interface: v2.00
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
Intel(R) Wireless WiFi driver for Linux
Copyright(c) 2003- 2015 Intel Corporation
usb 8-1: current rate 16000 is different from the runtime rate 24000
usb 8-1: current rate 16000 is different from the runtime rate 32000
usb 8-1: current rate 16000 is different from the runtime rate 48000
uvcvideo: Found UVC 1.00 device Logitech BRIO (046d:085e)
iwlwifi: probe of 0000:06:00.0 failed with error -110
snd_hda_intel 0000:01:00.1: Disabling MSI
snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
uvcvideo 8-1:1.0: Entity type for entity Processing 3 was not initialized!
uvcvideo 8-1:1.0: Entity type for entity Extension 14 was not initialized!
uvcvideo 8-1:1.0: Entity type for entity Extension 6 was not initialized!
uvcvideo 8-1:1.0: Entity type for entity Extension 8 was not initialized!
uvcvideo 8-1:1.0: Entity type for entity Extension 9 was not initialized!
uvcvideo 8-1:1.0: Entity type for entity Extension 10 was not initialized!
uvcvideo 8-1:1.0: Entity type for entity Extension 11 was not initialized!
uvcvideo 8-1:1.0: Entity type for entity Extension 12 was not initialized!
uvcvideo 8-1:1.0: Entity type for entity Camera 1 was not initialized!
input: Logitech BRIO as /devices/pci0000:00/0000:00:05.0/0000:03:00.0/usb8/8-1/8-1:1.0/input/input16
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card4/input17
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card4/input18
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card4/input19
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card4/input20
input: HDA NVidia HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card4/input21
input: HDA NVidia HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card4/input22
input: HDA NVidia HDMI/DP,pcm=12 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card4/input23
snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC887-VD: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC1D0: dig-out=0x11/0x1e
snd_hda_codec_realtek hdaudioC1D0: inputs:
snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC1D0: Line=0x1a
nvidia-nvlink: Nvlink Core is being initialized, major device number 238
nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input24
input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input25
input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input26
input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card1/input27
input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card1/input28
input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card1/input29
input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card1/input30
input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input31
audit: type=1130 audit(1589598452.286:86): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=lvm2-monitor comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1589598452.287:87): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=lvm2-pvscan@8:18 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
MCE: In-kernel MCE decoding enabled.
EDAC amd64: F15h detected (node 0).
EDAC amd64: Node 0: DRAM ECC disabled.
usb 1-5: Focusrite Scarlett Gen 2 Mixer Driver disabled; use options snd_usb_audio device_setup=1 to enable and report any issues to g@b4.vu
usbcore: registered new interface driver snd-usb-audio
EDAC amd64: F15h detected (node 0).
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: F15h detected (node 0).
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: F15h detected (node 0).
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: F15h detected (node 0).
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: F15h detected (node 0).
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: F15h detected (node 0).
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: F15h detected (node 0).
EDAC amd64: Node 0: DRAM ECC disabled.
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 440.82 Wed Apr 1 20:04:33 UTC 2020
nvidia-uvm: Loaded the UVM driver, major device number 236.
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 440.82 Wed Apr 1 19:41:29 UTC 2020
[drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000c0000-0x000dffff window]
caller _nv000908rm+0x1bf/0x1f0 [nvidia] mapping multiple BARs
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] No driver support for vblank timestamp query.
[drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 0
audit: type=1130 audit(1589598453.440:88): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-udev-settle comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1589598453.735:89): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=dmraid-activation comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
RTL8211E Gigabit Ethernet r8169-200:00: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=r8169-200:00, irq=IGNORE)
r8169 0000:02:00.0 enp2s0: Link is Down
bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
tun: Universal TUN/TAP device driver, 1.6
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered disabled state
device virbr0-nic entered promiscuous mode
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered listening state
virbr0: port 1(virbr0-nic) entered disabled state
usb 8-1: reset high-speed USB device number 2 using xhci_hcd
usb 8-1: current rate 16000 is different from the runtime rate 48000
usb 8-1: current rate 16000 is different from the runtime rate 48000
usb 8-1: current rate 16000 is different from the runtime rate 48000
r8169 0000:02:00.0 enp2s0: Link is Up - 1Gbps/Full - flow control rx/tx
IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
rfkill: input handler disabled
rfkill: input handler enabled
usb 8-1: current rate 16000 is different from the runtime rate 48000
usb 8-1: current rate 16000 is different from the runtime rate 48000
usb 8-1: current rate 16000 is different from the runtime rate 48000
retire_capture_urb: 7 callbacks suppressed
rfkill: input handler disabled